4-Bank Channel Heater

• Type: Ceramic Heating Equipment
• Certification: CE, ISO, RoHS
• Structure: Van Type
• Origin: Suzhou
• Model NO.: CMT
• Production Capacity: 1000pieces/Month

Product Description

Ceramic Heating Element 
4 Bank Channel Heatter

HMT Code	Description	Width	Length	Volts	Power	Weight
		(mm)	(mm)	(V)	(kW)	(kg)
HMT3025	Single Channel	70	400	30	1.65	2.5
HMT6039	Single Channel	70	720	60	3.3	3.9
HMT60155	4-Bank channel	360	720	60	13.2	15.5
HMT110155	4-Bank channel	360	720	110	13.2	15.5
HMT240155	4-Bank channel	360	720	240	13.2	15.5

The 4 bank channel heater element has been designed to provide modular heating units of a robust design suitable for connection to a mains or low voltage electrical supply. The heaters are portable and solid and are suitable for use in temporary furnace design or for the heat treatment of pressure vessel welds and sections,or other large fabrications. Heat transfer to the component is effected by combined radiation and convection.

The heater element is manufactured from solid drawn 9swg Kanthal or nickel-chromium coiled wire. The coil may be embedded into a high conductivity cast refractory material within each of the unit stainless channels trays that form the heater. Alternatively the heaters can be manufactured with the traditional ceramic sleeves.

The standard heaters are suitable for heat treatment temperatures upto 800°C. Temperatures above this value can be achieved by variation of the composition of the case/coiled wire and heater design. Standard heaters are supplied for arange of voltages upto 240V.

Standard heaters should deliver a current of 55 amps and unit heaters are designed for arange of voltages be tween 30 and 277V. The higher rating permits the connection of the heaters in groups of three to suit3-phase supplies. The heaters may be mounted onto supports for vessel heat treatments or directly to the components as may be suitable. Avoid contaminants(grease,paint,oiletc)on the metal surface.